This is a working overview of Phosphocreatine, written for readers who want more than a one-paragraph summary but less than a textbook.
Reviewed 2025-08-21. Anything still debated is marked as such rather than presented as settled.
Creatine was first identified in skeletal muscle extracts in the nineteenth century, and its role in phosphagen energy buffering was clarified in the twentieth century. The monohydrate salt became widely studied after methods for inexpensive synthesis and crystallization were developed. Modern research examines its effects on muscle energetics, recovery, and cognitive performance under specific conditions. Findings vary with population, exercise protocol, baseline creatine status, and measurement method. Studies often compare supplementation with placebo during controlled training or testing schedules.
Creatine monohydrate is a hydrated form of creatine, a nitrogen-containing compound involved in cellular energy metabolism. Its molecular formula is C4H9N3O2·H2O, with a molar mass around 149.15 g/mol. The monohydrate is the most common solid form used in research and commercial settings because it crystallizes readily and remains stable under ordinary conditions. The term monohydrate indicates one water molecule per creatine molecule in the crystal lattice. It appears as a white crystalline powder with low odor.
In the body, creatine is synthesized from arginine, glycine, and methionine, mainly in the liver and kidneys, and is also obtained from foods such as meat and fish. About 95% of body creatine is stored in skeletal muscle, where a fraction is phosphorylated to phosphocreatine. Phosphocreatine serves as a rapid reserve of high-energy phosphate for short bursts of ATP regeneration. The monohydrate form supplies creatine after dissolution and absorption, but it is not itself the active phosphorylated species.
Quality control for creatine monohydrate typically combines identity, assay, and impurity tests. High-performance liquid chromatography with ultraviolet detection is common for separating creatine from creatinine and related substances. Nuclear magnetic resonance and infrared spectroscopy can confirm molecular structure, while titration may assess acid-base content. Moisture content, heavy metals, residual solvents, and microbial limits are checked according to applicable standards. These tests help distinguish compliant material from powders that have degraded, been diluted, or contain manufacturing residues.
Handling practices aim to limit moisture uptake and thermal exposure. Containers should stay closed when not in use, and storage areas should avoid direct sunlight, strong heat, and high humidity. Caking can occur when powder absorbs water, even if the creatine itself has not fully degraded. Aqueous stock solutions are best prepared fresh when needed because they are less stable than the solid. Open questions include how different excipients, packaging materials, and climate conditions affect long-term stability across global supply chains.
| Property | Value | Notes |
|---|---|---|
| Molecular formula | C4H9N3O2·H2O | Creatine plus one water molecule in the crystal lattice. |
| Molar mass | 149.15 g/mol | Calculated for the monohydrate form. |
| Appearance | White crystalline powder | Typical solid form; particle size can vary by processing. |
| Solubility class | Sparingly soluble in water | Dissolution improves with time, stirring, and temperature. |
| Common synonyms | Creatine hydrate; N-carbamimidoyl-N-methylglycine monohydrate | Names vary by chemical registry and supplier. |
Several creatine forms are sold, including monohydrate, anhydrous, hydrochloride, nitrate, citrate, and blends. Once dissolved, these forms deliver creatine, but they differ in molar mass, solubility, counterions, and water content. Creatine monohydrate has the largest body of published human data among these forms. Questions remain about whether any alternative form offers meaningful advantages in absorption, tolerability, or tissue uptake under practical conditions. The hydrate form's lower creatine content by mass is a compositional fact, not a statement about effectiveness.
Creatine monohydrate is a crystalline compound formed when one molecule of creatine associates with one molecule of water in the solid lattice. Its molecular formula is C4H11N3O3, and its molar mass is about 149.15 grams per mole. The material appears as a white, odorless powder that dissolves sparingly in water at room temperature. The monohydrate designation distinguishes it from anhydrous creatine, which lacks the bound water and has a lower molar mass. This hydrate is the most common commercial form of creatine used in nutritional and research settings.
Analytical methods for creatine monohydrate focus on identity, purity, and degradation products. High-performance liquid chromatography with ultraviolet detection is common, often at a wavelength near 210 nanometers. Titration and nuclear magnetic resonance spectroscopy can also quantify the parent compound. Pharmacopeial monographs specify tests for appearance, solubility, water content, and related substances, including creatinine. Purity values above 99 percent are typical for pharmaceutical-grade material, though supplement-grade products vary. Independent verification can detect label discrepancies.
Sourcing and verification of creatine monohydrate involve both manufacturing origin and third-party testing. Industrial production commonly starts with sarcosine and cyanamide, followed by crystallization to obtain the monohydrate. Some products are derived from animal sources, while others are synthesized from non-animal precursors. Certificates of analysis report assay, heavy metals, and microbial limits. Regulations differ by country: in the United States it is sold as a dietary supplement, whereas in the European Union it falls under food supplement rules.
Klibanski became chief of the Neuroendocrine Unit at Massachusetts General Hospital, studying hormones and neuroendocrinology with a focus on hypopituitarism and pituitary tumors. Her clinical research has also examined the effects of hypothalamic and pituitary disorders on body composition and bone density, including bone loss associated with anorexia nervosa and growth hormone deficiency. In 1997, Klibanski became the first woman from Mass General's Department of Medicine to become a professor of medicine at Harvard. She has authored more than 350 peer-reviewed papers and book chapters and has received the Endocrine Society Clinical Investigator Award and the Clinical Endocrinology Trust Medal from the Society for Endocrinology. Klibanski has served on the National Institute of Diabetes and Digestive and Kidney Diseases Board of Counselors and the editorial board of the Journal of Clinical Endocrinology and Metabolism, and is a past president of the Pituitary Society. She established the Center for Faculty Development at Massachusetts General Hospital and mentored more than fifty women, for which she received the Endocrine Society's Outstanding Mentor Award.
Scleroderma, polymyositis, and dermatomyositis elicit little or no CRP response. CRP levels also tend to remain low despite inflammatory activity in systemic lupus erythematosus (SLE) unless serositis or synovitis is present. This may be explained by increased levels of type I IFN in SLE, since type I IFN (i.e IFN alpha) inhibits hepatic CRP production. A polymorphisms of the CRP gene which cause lower CRP levels is also more frequent in SLE patients compared with controls. Elevations of CRP in the absence of clinically significant inflammation can occur in kidney failure. CRP level is an independent risk factor for atherosclerotic disease. Patients with high CRP concentrations are more likely to develop stroke, myocardial infarction, and severe peripheral vascular disease. Elevated level of CRP can also be observed in inflammatory bowel disease (IBD), including Crohn's disease and ulcerative colitis. High levels of CRP has been associated to point mutation Cys130Arg in the APOE gene, coding for apolipoprotein E, establishing a link between lipid values and inflammatory markers modulation.
There are many applications for AMS throughout a variety of disciplines. AMS is most often employed to determine the concentration of 14C, e.g. by archaeologists for radiocarbon dating. Compared to other radiocarbon dating methods, AMS requires smaller sample sizes (about 50 mg), while yielding extensive chronologies. MS technology has expanded the scope of radiocarbon dating. Samples ranging from 50,000 years old to 100 years old can be successfully dated using AMS, as other forms of mass spectrometry provide insufficient suppression of molecular isobars to resolve 13CH and 12CH2 from 14C atoms. Because of the long half-life of 14C, decay counting requires significantly larger samples. 10Be, 26Al, and 36Cl are used for surface exposure dating in geology. 3H, 14C, 36Cl, and 129I are used as hydrological tracers. Accelerator mass spectrometry is widely used in biomedical research. In particular, 41Ca has been used to measure bone resorption in postmenopausal women. List of accelerator mass spectrometry facilities Arizona Accelerator Mass Spectrometry Laboratory
2,4,6-Triisopropylbenzenesulfonyl azide (trisyl azide) is an organic chemical used as a reagent to supply azide for electrophilic amination reactions, such as for the asymmetric synthesis of unnatural amino acids. Introduction of an azide on the α carbon of carboxylic acid derivatives using trisyl azide is an efficient alternative to electrophilic halogenation followed by nucleophilic substitution using anionic azide. Using an oxazolidinone as chiral auxiliary typically gives good induction of the stereochemistry at the α position. Subsequent reduction converts the α-azide to an α-amine.
Sources: en.wikipedia.org
AATCC—the American Association of Textile Chemists and Colorists— is a 501(c)(6) not-for-profit professional association that provides test method development, quality control materials, educational development, and networking for textile and apparel professionals throughout the world. The American Association of Textile Chemists and Colorists (AATCC) develop the test methods the textile industry use to ensure product quality. AATCC is the world's leading not-for-profit association serving textile professionals since 1921. AATCC, headquartered in Research Triangle Park, Durham, N.C., USA, provides test method development, quality control materials, and professional networking for thousands of members throughout the world.
Banting House features archival materials, artifacts, and other ephemera associated with Banting as co-discoverer of insulin, doctor, and artist, as well as his involvement in the first and second world wars. One gallery depicts the kind of office Banting might have had, and contains several of his belongings, including his original medicine cabinet, and a graduated cylinder Banting used during his time at the University of Western Ontario. The apothecary in the next room features a sink that Banting installed for his medical practice. Other galleries in the museum hold original belongings of Banting as well, most notably his desk and his bed frame. The bed frame is kept in Banting's bedroom, and visitors are encouraged to take a moment or a picture with it, as it is not roped off like many other areas of the museum. Additionally, an official replica of the Nobel Prize medal co-awarded to Banting and Macleod is on display, as well as many of Banting's other medals. Other displays include the military gallery, which includes a representation of the type of operating room Banting would have worked in on the field during the First World War, some information on the projects he headed during the Second World War, and an entire gallery filled with artwork done by Banting.
Class A (or 1) (Rhodopsin-like) Class B (or 2) (Secretin receptor family) Class C (or 3) (Metabotropic glutamate/pheromone) Class D (or 4) (Fungal mating pheromone receptors) Class E (or 5) (Cyclic AMP receptors) Class F (or 6) (Frizzled/Smoothened) More recently, an alternative classification system called GRAFS (Glutamate, Rhodopsin, Adhesion, Frizzled/Taste2, Secretin) has been proposed for vertebrate GPCRs. They correspond to classical classes C, A, B2, F, and B. An early study based on available DNA sequence suggested that the human genome encodes roughly 750 G protein-coupled receptors, about 350 of which detect hormones, growth factors, and other endogenous ligands. Approximately 150 of the GPCRs found in the human genome have unknown functions. Some web-servers and bioinformatics prediction methods have been used for predicting the classification of GPCRs according to their amino acid sequence alone, by means of the pseudo amino acid composition approach. GPCRs are involved in a wide variety of physiological processes. Some examples of their physiological roles include:
BIA Separations was formed in 1998 by a group of scientists in Ljubljana, Slovenia to commercialize a new chromatographic resin based on monolith technology. Monolithic resin was developed independently by three different laboratories in late 1980s led by Hjertén, Švec and Tennikova. The company was one of the few Slovenian companies to receive venture capital funding at that time-Horizonte Venture Management realizing the potential of monoliths made the initial investment in the company. During that year, BIA Separations released its first commercial product marketed under the trade name of CIM (Convective Interaction Media). The new technique was named HPMC (High Performance Monolith Chromatography). During the 1999 and 2000s, the company promoted this new platform technology to the scientific and business community and registered several patents. In 2007 the company headquarters moved to Villach, Austria. In 2011 BIA Separations entered a strategic partnership with Japan Synthetic Rubber Corporation, a Japanese company producing synthetic materials. A strategic partnership agreement with Showa Denko K.K. (SDK) was signed in 2012.
A lot of effort has been put into controlling cell selectivity. For example, attempts have been made to modify and optimize the physicochemical parameters of the peptides to control the selectivities, including net charge, helicity, hydrophobicity per residue (H), hydrophobic moment (μ) and the angle subtended by the positively charged polar helix face (Φ). Other mechanisms like the introduction of D-amino acids and fluorinated amino acids in the hydrophobic phase are believed to break the secondary structure and thus reduce hydrophobic interaction with mammalian cells. It has also been found that Pro→Nlys substitution in Pro-containing β-turn antimicrobial peptides was a promising strategy for the design of new small bacterial cell-selective antimicrobial peptides with intracellular mechanisms of action. It has been suggested that direct attachment of magainin to the substrate surface decreased nonspecific cell binding and led to improved detection limit for bacterial cells such as Salmonella and E. coli.
Sources: en.wikipedia.org
Within the field of supramolecular polymerization, Schmatloch et al. used automated synthesis to create main-chain supramolecular coordination polymers, reacting bis(2,2′:6′,2″-terpyridine)-functionalized poly(ethylene oxide) with various metal(II) acetates. From this, it was revealed that classical laboratory approaches could be transferred to automatic synthesis, optimizing the processes to increase efficiency and aid with reproducibility.
Polycondensation involves the formation of polymers through condensation reactions between different species, creating condensation polymers. With automated synthesis, General electric manufactured an approach for melt-polymerizations of BPA and diphenyl carbonate (DPC), using sodium hydroxide (NaOH) as the catalyst. Once the results were analyzed, it was shown that, by using an automated method of polymerization, the effect of varying the catalyst amount became more distinct and improved the reproducibility for the reaction. Furthermore, it demonstrated an increase within the homogeneity of the polymers in the microreactors.
Moroder studied chemistry at the University of Padova, where he graduated 1965 in chemistry with the doctoral thesis on synthesis of S-peptide of ribonuclease A in the laboratory of Ernesto Scoffone at the Institute of Organic Chemistry. In 1968 he joined Klaus H. Hofmann's Group at the University of Pittsburgh to work on chemical synthesis of the peptidic adrenocorticotropic hormone and its derivatives. Moroder habilitated in 1971 at the University of Padova in Chemistry of Natural Products. 1975 he became a senior research fellow in the Department of Peptide Chemistry at the Max Planck Institute for Biochemistry (MPIB) in Martinsried headed by Erich Wünsch. Between 1991 and 2008 he was the head of the Laboratory of Bioorganic chemistry at the MPIB. Since 1994 he was an adjunct professor at the Technical University of Munich.
Annie Pardo studied biology at the Faculty of Sciences of the National Autonomous University of Mexico. She also completed her master's and doctoral degrees in biochemistry at the same university. She conducted research stays at the American universities of Washington University in St. Louis; at the University of Illinois Chicago, and at the pathology department of the Baylor College of Medicine in Houston, Texas. In 1980, she founded the biochemistry research laboratory at the Faculty of Sciences of UNAM. She was a "C-level" professor at the Faculty of Sciences of the National Autonomous University of Mexico and was named a "level III researcher" of the Sistema Nacional de Investigadores. In May 2023, she received the National Prize for Arts and Sciences in the category of physical-mathematical and natural sciences for "her research in biochemistry, lung diseases, and aging studies".
Sources: en.wikipedia.org
Creatine is the base compound, while creatine monohydrate is a solid crystalline form that contains one water molecule per creatine molecule. Once dissolved, the monohydrate dissociates and releases creatine, which can participate in cellular energy metabolism. The monohydrate is the form most commonly used in research and commercial products.
Meat and fish contain creatine, and the human body also synthesizes it from amino acids. The monohydrate form is not a natural food ingredient as such; it is a manufactured crystalline solid that provides creatine after ingestion. Food sources contribute to total body creatine stores alongside endogenous synthesis.
It means the crystal lattice includes one molecule of water for each molecule of creatine. This water is part of the solid's ordered structure, not bulk moisture. The hydrate form influences properties such as solubility, density, and shelf stability.
Keep it in a sealed container in a cool, dry place away from direct heat and moisture. Dry powder is more stable than prepared solutions.